Seachem CoralCrete Epoxy Adhesive works underwater or dry. It is ideal for working with larger colonies of branching coral, most large polyp coral or adhering plating coral to rockwork. Seachem CoralCrete Epoxy Adhesive makes attaching coral frags and coral scaping so much easier.

Seachem CoralCrete is safe for aquarium when used as directed.

Seachem CoralCrete is available in grey and purple.

Benefits

Working time of 5 minutes which allows for plenty of work time while also quickly securing coral or rock.

Fully cures submerged or emerged within 24 hours.

Directions

For sensitive skin, wear latex gloves. Cut off desired amount of CoralCrete. Replace unused CoralCrete into plastic storage tube. Remove film and knead CoralCrete together until uniform color is achieved.

Once mixed, CoralCrete can be used to adhere coral or rock, either submerged or emerged. Press firmly around base or contact point of coral or rock to insure CoralCrete penetrates pores and surface grooves. Curing begins in about 5 minutes, hardening in about 15 minutes. CoralCrete cures fully in 24 hours. Protein Skimmers may over activate during cure time.

FAQ

How should I store the CoralCrete I do not use?

A: When not in use, CoralCrete should be stored in the plastic tube it comes packaged in.

Is there a difference between the purple and grey other than color?

A: No, both purple and grey function in the same manner. Simply pick whichever you prefer for your project.

Directions state that CoralCrete hardens within 15 minutes and fully cures within 24 hours. What's the difference between hardening and curing?

A: After 5 minutes, the hardening process has begun and you have, at most, 10 minutes more of working time. The 15 minute hardening means that, at that point, the piece is set; the material is no longer malleable, and you will no longer be able to work with it (it may be possible to pull pieces apart, but you will not be able to reposition them). While you can no longer work with it, chemical processes are still occurring as it continues to harden further. Curing means that after 24 hours, all chemical processes are complete and the material is essentially rock hard.

Safety

May cause skin irritation and eye irritation. Keep container tightly closed. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Wear protective gloves/eye protection. IF ON SKIN: Wash with plenty of water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation or rash occurs, or if eye irritation persists, get medical advice/attention.